Cozy Mystery Publishing, Writing

Large Print Books | Cozy Mystery Publishing Process

Large Print Cozy Mysteries

This post is part of my series on “Publishing a Cozy Mystery.” This series isn’t meant to tell you how you have to go about it and dictate what’s right or wrong. Instead, I’m sharing my personal journey from writing my initial draft to seeing my first book, Murder at the Marina, be released. I’ll talk about the good, bad, and the ugly. And trust me, there was plenty of ugly along the way.

Last time I talked with you about ARCs (advance reader copies). Today, I’m going to tell you about my experiences publishing large print editions of my cozy mysteries.

What is a large print edition?

This seems like a simple question, but when I did some research on large print books I found varying answers.

Joanna Penn of The Creative Penn uses 16-point font for her large print editions which is consistent with Amazon’s criteria and the Royal National Institute for Blind People. I’ve heard other people say that 14-point font is considered large print. However, both the American Council for the Blind and the American Federation for the Blind suggest a minimum of 18-point font. And what some organizations and readers consider to be “large print” is what others consider to be “giant print.”

Font size isn’t the only consideration—line spacing (increasing the space between lines can improve readability) and type of font (sans serif may be easier to read for some) are also important. As with font size, I found varying advice on the ideal line spacing and type of font for large print editions.

Formatting my large print editions

When I decided to create a large print edition of my first cozy mystery, Murder at the Marina, I found Joanna Penn’s tips to be really good starting point. I also went and looked at large print editions of novels at my local library to get a feel for what readers might expect in terms of font size and spacing.

First off, I decided to go with a larger trim size (6×9 inches for my large print edition vs. 5.5×8.5 inches for my paperback edition). Next, I took my paperback document and reformatted it using a larger font (17-point compared to 11-point in my paperback edition) and increased the line spacing. {You can read more about how I formatted my paperback and ebooks here.} Finally, I adapted my paperback book cover by increasing the trim size and adding a “Large Print” sticker to the front to differentiate it from the paperback version.

Then I uploaded my files and hit the publish button. Everything went smoothly after that. . .well, that is, until it didn’t.

Yikes! Negative feedback

A few weeks after I published the large print edition of Murder at the Marina, I received a negative comment on Amazon saying that it wasn’t comparable to Reader’s Digest large print editions. Remember what I said above about varying definitions of large print? Well, I ran smack-dab into that.

I felt absolutely horrible that this poor man bought something that didn’t live up to his expectations. I really wished I could have contacted him, but I had no way of doing so. I can only hope he was able to return it and get a refund.

Despite the negative feedback, it was a great learning experience. I updated my book descriptions to indicate what size font and type of font I was using in my large print editions. For the Amazon description, I also added in a section letting potential buyers know they can use the “Look Inside” feature to see if the font size would meet their needs

When it came time to format my second cozy mystery, Bodies in the Boatyard, I went with an even larger font (18-point this time) and used a sans-serif font (Arial vs. Gentium Book Basic in the paperback) to improve readability.

Large print editions make up a good chunk of my sales

When I first set out to make a large print edition, I thought I might sell a few copies and I liked the idea of having a version that would be easier for some folks to read. Little did I know that my large print books would end up being 17% of my sales. So, although it takes some effort to produce a large print version (not to mention the cost of an additional ISBN), it’s been quite worthwhile.

For another perspective on formatting and publishing large print cozy mysteries, check out this informative post over at The Ninja Librarian.

What are your thoughts and experiences with large print editions?

Other posts in my “Publishing a Cozy Mystery” series:

Cover Design | Draft #743 | Beta Readers | Traditional vs. Self-Publishing | Editing | Going Wide or Amazon Exclusive | Ebooks, Print, or Both | Book Formatting| Distribution Channels | Book Release in Numbers | Blog Tours | ARCs (Advance Reader Copies) | Large Print Books

Large Print Front Cover

The large print edition of Murder at the Marina is available at Amazon | Barnes & Noble| Book Depository | Books-A-Million | Indigo. If you would like to request that your local library order a copy of  Murder at the Marina, you can find the necessary information here.

 

Bodies in the Boatyard Large Print Front Cover

The large print edition of Bodies in the Boatyard is available at Amazon | Barnes & Noble. If you would like to request that your local library order a copy of Bodies in the Boatyard, you can find the necessary information here.

14 thoughts on “Large Print Books | Cozy Mystery Publishing Process”

  1. This is interesting! The large print editions are a great idea, and I’m impressed you thought of it. It’s also great to hear that it’s worth the effort.

    Liked by 1 person

Leave a Reply to messymimi's meanderings Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s